Use: put the host into the water, turn on the power button, wait for the sprinkler to come out of water, and then start normal use. Press the power button to shut down after use.
Charging: plug the DC head of the charging cable into the charging socket of the host computer, and connect the USB head of the charging cable to the USB port of the charger. It can be fully charged in 3-4 hours.
Indicator light: After USB is inserted into the DC charging head, the indicator light next to it shows red, indicating that it is charging. After charging, the indicator light turns green
When using water pipe to connect the product and nozzle, in order to prevent water leakage after connecting the product and nozzle, and affect the water outlet effect, please make sure to put the matching water pipe gasket and tighten the thread.
Matters needing attention:
Use: Do not lift the host from the water during use, otherwise it will cause no water to spray. The reason is that the main engine pump works abnormally after volume gas. Please turn off the machine and put it on the ground, Then raise the shower head to straighten the water pipe, drain the water in the water pipe, and then restart the machine. You can work as usual. The water pump should be put into the water as soon as possible after starting up, and it is forbidden to stay in the air for a long time.Medium operation. Turn off the machine and drain the water in the water pipe after use.
Charging: The output of the charger should be: 5V 2A (or greater than 2A, some chargers. The label unit is mA, 1A=1000mA). Do not put the water pump in when charging in the water.
